Model	Max.Torque (N.m)	Max.Speed (cys/min)	Stock Bore Size		A	B(h7)	C
			Dia H7	Keyway
MX22	78.4	1200	22	6x2.8	80	95	77
MX35	235	1200	35	10x3.3	90	125	87
MX50	441	1200	50	14x3.8	100	155	97
MX70	784	1200	70	20x4.9	127	200	124

 

Model	D	E	F	S	H-M Chip hole	Lubrication	Oil(cc)
MX22	80	12	35	16	4xM8xP1.25	M6xP1.0	80
MX35	110	12	50	16	4xM8xP1.25	M6xP1.0	110
MX50	140	14	70	16	6xM8xP1.25	M8xP1.25	190
MX70	180	15	100	20	6xM10xP1.5	M8xP1.25	340

Installation and Usage 1.For installation,insert the clutch into the hub bore of a pulley, agear or atorque arm and screw the bolts (high tension) into the tapped holes of the end face of the clutch.See illustration on the right. 2.A press fit is required for MX series Clutches for indexing applications, but do not exceed 0.025mm when press fitting. 3.Adjust the side of key to fit the keyway tightly, but make a clearance between the top of key and keyway. 4.,When mounting the clutch on a shaft, apply pressure to the clutch inner race end, but never to the outer race. 5.Proper selection of the Cam Clutch provides accurate indexing performance.A braking device and a back stopping device may also be required for accurate performance. Lubrication 1.Oil lubrication is recommended. 2.Do not use grease of lubricants with EP additives.