Model	Max. Torque (N.m)	Max.Speed		Max. Indexing Speed	Stock Bore Size		A	B	C	D	E(m6)	F	G	H-M Hole	S
		Inner	Outer		Dia H7	Keyway
MZ15	186	1800	900	150	15	5x2.3	62	68	60	58	47	25	5.5	6xM5xP0.8	10
MZ17	215	1700	800	150	17	5x2.3	66	75	64	64	52	28	6.3	6xM5xP0.8	10
MZ20	323	1600	700	150	20	6x2.8	67	80	65	68	55	30	7.6	6xM6xP1.0	12
MZ30-22	735	1500	500	150	22	6x2.8	82	100	80	88	75	45	8.9	6xM8xP1.25	16
MZ30-25					25	8x3.3
MZ30					30	10x3.3
MZ35	1080	1400	300	150	35	10x3.3	87	110	85	95	80	50	8.7	6xM8xP1.25	16
MZ45-40	1620	1400	300	150	40	12x3.3	92	125	90	110	95	60	8.4	6xM8xP1.25	16
MZ45					45	14x3.8
MZ60-50	2110	1200	250	150	50	14x3.8	102	155	100	140	125	80	9.1	6xM8xP1.25	16
MZ60-55					55	16x4.3
MZ60					60	18x4.4
MZ70-65	3040	1100	250	150	65	18x4.4	105	175	103	145	145	95	8.6	6xM8xP1.25	16
MZ70					70	20x4.9

Installation and Usage 1.MZ Series Cam Clutches are shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required. 2.For attaching pulleys, gears or sprockets to the clutches, insert hubs(with f6 tolerance of JIS standard) along the inner surface of the outer race and screw the bolts(high tension) into the tapped holes on the clutch end. 3.External thrust load should be supported by other devices, not by the Cam Clutch. 4.Use only a parallel key to secure the clutch to the shaft.Do not use a tapered key. 5.When mounting the clutch onto the shaft, apply pressure to the inner race end but never to the outer race.See the illustration on the right. 6.For vertical mounting, please consult STDIER. 7.Ambient temperature range is -5 to 40. 8.Key to be used should be in accordance with JIS B1301-1976 or ISO R773. Lubrication 1.Oil lubrication is recommended. 2.Do not use greases or lubricants with EP additives.