Model.	Torque Capacity (N.m)	Max Overrunning Speed/mm		Inner	Outer DiaB h6(mm)	LenthC (mm)	Inner Keyway (mm)	Outer Keyway (mm)
				Dia A
		Inner Race	Outer Race	H7(mm)
TSS12	32	4500	2300	12	35	13	4x1.8	4x1.4
TSS15	34	3500	1800	15	42	18	5x1.2	5x1.8
TSS17	60	3200	1600	17	47	19	5x1.2	5x2.3
TSS20	100	2500	1300	20	52	21	6x1.6	6x2.3
TSS25	154	2000	1000	25	62	24	8x2.0	8x2.8
TSS30	270	1600	800	30	72	27	8x2.0	10x2.5
TSS35	570	1400	700	35	80	31	10x2.4	12x3.5
TSS40	728	1300	650	40	90	33	12x2.2	12x4..1
TSS45	907	1100	550	45	100	36	14x2.1	14x4.6
TSS50	1349	1000	500	50	110	40	14x2.1	14x5.6
TSS60	2370	840	420	60	130	46	18x2.3	18x5.5
TSS70	3017	750	380	70	150	51	20x2.7	20x6.9
TSS80	4370	670	340	80	170	58	22x3.1	20x7.5

Intallation and Usgae 1.The TSS Series Cam Clutch was designed for press fit installation. correct interference dimensions must bu maintained to obtain maximum clutch performance. The internal diameter of the housing should meet the H7 tolerance of the JIS standard. Refer to item 3 in the installtion and usage of CSK Series Cam Clutches for information on the installation method. 2.Make sure the housing has enough stength to withstand the pressure required for the press fitting installation of the clutch. 3.When installing the clutch,mount it with a type 62 bearing to avoid radial force,since this clutch does not have any bearing inside. 4.The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow shown on the clutch plate. 5.The recommended shaft tolerance is H7, and the key profile should be in accordance with the following standard. TSS 8~12 ...... DIN 6885.1 TSS 15~60...... DIN 6885.3 6.Suitable surface pressure of the key should be selected according to your company design standards. Lubrication 1.Oil lubrication is recommended.